VitalTrack is a sensor board that can simultaneously monitor vital signs and movements.
VitalTrack is designed to allow users to create their own customized biosignal measurement devices. Recommended measurement locations: Peripheral nerves (e.g. fingers) are recommended for clear data collection.
VitalTrack - PPG&Motion is a sensor board that can simultaneously monitor a user's vital signs and movements in real time, and its main purpose is to provide raw data to researchers and developers.
It detects blood flow changes through PPG sensors and collects movement data through IMU sensors. This raw data can be used for various research and development purposes, and an SDK is provided so that researchers can 'customize' it.
(Supports Android operating system. iOS, Windows, and Linux operating systems will be provided in the future.)
VitalTrack Features
Provides 10 types of biosignal data
VitalTrack - PPG&Motion provides 10 types of bio-signal data.
PPG data
9-axis IMU
Acceleration (3 axis)
Gyro (3 axis)
Geomagnetism (3-axis)
VitalTrack - PPG&Motion does not require module (battery, display) connection.
The VitalTrack - PPG&Motion functions can be used normally with just the sensor board.
The connection between the battery and the display provides the following conveniences:
Connect the battery
When the battery is connected, you can measure wirelessly via Bluetooth connection without the constraints of a power cable. Even when the battery is not connected, you can use it in the same way by supplying power via a USB-C type cable.
Connect the display
When you connect the display, the information you can check is the battery level, current time, and heart rate.
Please refer to the product manual for detailed information on [Connecting the Sensor Board, Battery, and Display].
Product Specifications ( Technical Specifications )
VitalTrack - PPG&Motion
| |
---|
| Macpa (PPG) - 1 channel Motion Sensor -> Accelerometer - 3 axis -> Gyroscope - 3 axis -> Magnetometer - 3-axis |
---|
| Pulse wave (PPG): 50Hz Motion Sensor: 50Hz |
---|
| |
---|
| |
---|
When using battery terminals | |
---|
When using a C type terminal | |
---|
| 14.5(w) * 40.5(d) * 12.0(h) |
---|
| |
---|
Charging time (based on full discharge) | About 2 hours (based on 140mAh) |
---|
Operating time (continuous use) | About 9 hours (based on 140mAh, when used continuously) |
---|
| Electrostatic touch button, physical button for reset |
---|
| |
---|
| Bluetooth v5.0 Compliant(BLE) |
---|
Connecting equipment
| - Battery TW-501230 (140mAh) recommended for VitalTrack -Other 1.25mm/SMD type/2-pin compatible batteries can be used |
| - Recommended display for VitalTrack (Spliced Type) - Jessinie (Brand) / 80 x 160 (Green) / Spliced Type (8 pin) display with ST7735 drive available |